For projects in Kolkata
HVAC, plant and machine noise control in Kolkata
Noise with a source. Almost every honest fix is at the machine, the duct or the plant room, and almost nothing useful happens by lining the far wall of the occupied space. Split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
- At source
- Enclosure, barrier or anti vibration mounts at the machine.
- In the path
- Duct lining, attenuators and lagging on the first run out of the plant.
- At the receiver
- Only after the first two, and only for what is left.
- Quote
- From a plan and a section, within 48 hours
01 / The material
What this is, and what it changes in a Kolkata room
Noise with a source. Almost every honest fix is at the machine, the duct or the plant room, and almost nothing useful happens by lining the far wall of the occupied space.
Split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
Work reaching us from Kolkata is mostly old buildings and conversions, offices, clubs and restaurants, schools, clinics, auditoriums.
- Tall rooms, hard plaster High ceilings and lime plaster hold sound for a long time. A room can look magnificent and still defeat anyone trying to speak in it.
- Timber floors between floors Footfall travels straight down through the joists. A resilient layer under the new finish does more than anything applied to the ceiling below.
- The structure is staying Conversions here keep the original fabric, so the work has to be internal, shallow and ideally reversible.
- At source Enclosure, barrier or anti vibration mounts at the machine.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for HVAC and plant noise control are on the main product page. This page covers what that means for a project in Kolkata.
02 / The build-up
The stack, in the order it is installed
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Kolkata, split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
Duct and plant wrap. Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
-
Layer 2
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Kolkata, auditoria, community halls and pandal spaces carry amplified speech and music at high level.
Independent leaf. A second wall that does not touch the first. Nothing else comes close for the money.
-
Layer 3
Wood wool acoustic panels
Wood fibre bound into a rigid board with an open texture. In Kolkata, long established schools and colleges in masonry with high ceilings and very large class sizes.
On a cavity. Mounted on battens with an air gap, which is where the low mid performance comes from.
We would rather argue about the build-up at design stage than on site. See how we support architects.
03 / In this market
What we see driving Kolkata briefs
- Tall rooms, hard plaster
High ceilings and lime plaster hold sound for a long time. A room can look magnificent and still defeat anyone trying to speak in it.
- Timber floors between floors
Footfall travels straight down through the joists. A resilient layer under the new finish does more than anything applied to the ceiling below.
- The structure is staying
Conversions here keep the original fabric, so the work has to be internal, shallow and ideally reversible.
- Humid most of the year
PET felt does not hold moisture or feed mould, which matters where mineral products sag within a couple of seasons.
- Plant and HVAC
Split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
04 / Room by room
Room by room, on a typical Kolkata job
-
At source
Enclosure, barrier or anti vibration mounts at the machine. High ceilings and lime plaster hold sound for a long time. A room can look magnificent and still defeat anyone trying to speak in it.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Wood wool acoustic panels, 20 mm
- Ceiling baffles and clouds, Made to the drawing, standard and custom
-
In the path
Duct lining, attenuators and lagging on the first run out of the plant. Footfall travels straight down through the joists. A resilient layer under the new finish does more than anything applied to the ceiling below.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Wood wool acoustic panels, 400 kg per cubic metre
- Ceiling baffles and clouds, Both faces work, which is why suspended area outperforms the same area laid flat
-
At the receiver
Only after the first two, and only for what is left. Conversions here keep the original fabric, so the work has to be internal, shallow and ideally reversible.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Wood wool acoustic panels, 0.30
- Ceiling baffles and clouds, ASTM C423
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
04 / Climate and durability
Why the climate in Kolkata changes the material, not the target
Kolkata is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
On a Kolkata job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
06 / Before you buy
Six mistakes that turn into a second fit-out
-
Absorption on the office wall for a plant room problem
Plant noise treated as a room problem is the most reliable way to spend a budget and change nothing anyone can hear.
-
Lagging a duct that is carrying the noise as breakout from the fan
Enclose the machine, break the vibration path, then deal with what is left. Doing it in the other order costs more and achieves less.
-
Ignoring structure borne vibration through the mounts
Small on the drawing, expensive on site, and almost always found after handover.
-
Treating it as a generic Kolkata job
High ceilings and lime plaster hold sound for a long time. A room can look magnificent and still defeat anyone trying to speak in it.
05 / Supply
Getting it to Kolkata, with real dates
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | three days |
| Dispatch | 2 to 4 working days |
| To site | three days |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly fourteen hundred kilometres, normally three days on a dedicated truck.
Questions from Kolkata projects
What makes HVAC, plant and machine noise control different in Kolkata?
Split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs. High ceilings and lime plaster hold sound for a long time. A room can look magnificent and still defeat anyone trying to speak in it.
Where should the budget go first on a Kolkata project?
At source. Enclosure, barrier or anti vibration mounts at the machine. In the path. Duct lining, attenuators and lagging on the first run out of the plant.
Do you have an office or installation team in Kolkata?
No. We manufacture in India and supply into Kolkata. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Kolkata site?
made at: Our own plant, Palwal, Haryana, reaches site in: three days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Absorption on the office wall for a plant room problem. Lagging a duct that is carrying the noise as breakout from the fan.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.