Manufactured in India, supplied in Hyderabad
Soundproof curtains in Hyderabad
We manufacture soundproof curtains at our own plant at Palwal in Haryana, India, and supply them into Hyderabad. Hyderabad combines large IT campuses, a working film industry and a pharmaceutical manufacturing belt.
- Build-up
- 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face
- Total thickness
- 10 to 12 mm
- Weight
- 5.5 kg per sq m
- Reduction
- Up to 30 dB
- STC
- 30
- Lead time
- Made to size
- Minimum order
- 5 pieces
- ASTM E90
- Standard sizes, 8 x 4 ft and 5 x 4 ft
- Made at our own plant, Palwal, Haryana, India
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The product, described honestly, for a Hyderabad brief
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. It is the answer for a doorway, a stage, a partition that must move, not a substitute for a wall.
Work reaching us from Hyderabad is mostly IT campuses, film and content studios, pharma plants, hospitals, schools, hotels.
RC frame apartments and gated communities with stone and tile floors, sharing slabs and lift cores.
- Full height with return Curtain taken floor to soffit with a side return and an overlap, because the gap is what leaks, not the fabric.
- Track with a seal Ceiling track plus a floor seal or drape, so the perimeter is closed when it is drawn.
- Double layer at a doorway Two curtains with an air gap where a single layer will not reach the target.
- What it will not do A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Hyderabad.
02 / Specification
The numbers, and they do not move by city
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Standard5.5 kg per sq m. Openings, stages, temporary partitions
| Build-up | 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face |
|---|---|
| Total thickness | 10 to 12 mm |
| Weight | 5.5 kg per sq m |
| Reduction | Up to 30 dB |
| STC | 30 |
| Test standard | ASTM E90 |
| Standard sizes | 8 x 4 ft and 5 x 4 ft |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What decides the build-up in Hyderabad
- Campus floors at scale
Large open plans with glass and hard flooring, repeated across many buildings. Consistency across the order is the value.
- A working film industry
Shooting floors, dubbing rooms and content spaces where the shell has to isolate before anything else is decided.
- Pharma and clean areas
Manufacturing plant next to controlled spaces, where mechanical noise is a design problem rather than a comfort one.
- Granite and hard ground
Buildings sit on rock, and rock transmits. Structure-borne noise from plant travels further here than people expect.
- The housing stock
RC frame apartments and gated communities with stone and tile floors, sharing slabs and lift cores.
- The studio and content scene
A very large film and dubbing industry with rooms built inside commercial buildings and studio complexes.
For a Hyderabad practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Conditions
What the Hyderabad climate rules in and rules out
Hyderabad is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Supply
What the route into Hyderabad actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | four days |
| Dispatch | 2 to 4 working days |
| To site | four days |
| Packing | Rolled and bagged with track and fixings listed separately. |
| Lead time | Made to size. Confirmed at quote. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly fifteen hundred kilometres, normally four days on a dedicated truck.
5 curtains.
| Any size | 5 pieces |
|---|
Curtains are made to size, so the minimum is counted in pieces rather than area.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Hyderabad presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Hyderabad: questions we are actually asked
Are these soundproof curtains made in Hyderabad?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Hyderabad as the manufacturer rather than through a dealer. Hyderabad combines large IT campuses, a working film industry and a pharmaceutical manufacturing belt. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Hyderabad project?
Large open plans with glass and hard flooring, repeated across many buildings. Consistency across the order is the value. Shooting floors, dubbing rooms and content spaces where the shell has to isolate before anything else is decided. Those two things move the build-up far more than the panel figure does.
Is this the right material for Hyderabad conditions?
Hyderabad is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
What is the delivery time into Hyderabad?
made at: Our own plant, Palwal, Haryana, reaches site in: four days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will soundproof curtains not do?
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
Is there a minimum order, and how does it arrive?
5 curtains. Any size, 5 pieces. Curtains are made to size, so the minimum is counted in pieces rather than area. Rolled and bagged with track and fixings listed separately.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Hyderabad.