Manufactured in India, supplied in Germany
Soundproof curtains in Germany
We manufacture soundproof curtains at our own plant at Palwal in Haryana, India, and supply them into Germany. Made at our own plant in India, shipped in container loads to German sites, specified against your drawings before anything leaves the factory.
- Build-up
- 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face
- Total thickness
- 10 to 12 mm
- Weight
- 5.5 kg per sq m
- Reduction
- Up to 30 dB
- STC
- 30
- Lead time
- Made to size
- Minimum order
- 5 pieces
- ASTM E90
- Standard sizes, 8 x 4 ft and 5 x 4 ft
- Made at our own plant, Palwal, Haryana, India
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / What it is
The product, described honestly, for a Germany brief
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. It is the answer for a doorway, a stage, a partition that must move, not a substitute for a wall.
Work reaching us from Germany is mostly offices, studios, clubs, hotels, schools, clinics, industrial plant rooms.
Altbau blocks have solid masonry walls and timber joist floors, so airborne noise is controlled but footfall is not. Neubau is concrete with better floors and much harder surfaces.
- Full height with return Curtain taken floor to soffit with a side return and an overlap, because the gap is what leaks, not the fabric.
- Track with a seal Ceiling track plus a floor seal or drape, so the perimeter is closed when it is drawn.
- Double layer at a doorway Two curtains with an air gap where a single layer will not reach the target.
- What it will not do A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Germany.
02 / The numbers
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Standard5.5 kg per sq m. Openings, stages, temporary partitions
| Build-up | 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face |
|---|---|
| Total thickness | 10 to 12 mm |
| Weight | 5.5 kg per sq m |
| Reduction | Up to 30 dB |
| STC | 30 |
| Test standard | ASTM E90 |
| Standard sizes | 8 x 4 ft and 5 x 4 ft |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
The Germany conditions that change the answer
- Two building stocks
Altbau apartments with timber floors pass noise between homes. Post-war concrete holds it in and rings. The same room needs a different answer depending on which one you are in.
- Specified acoustics
Most German jobs arrive with an acoustician already involved. Send us the target values and we will tell you which build-up gets there, and which one will not.
- Container quantities
Fit-outs across several floors or sites are cheaper by container. We quote full loads and stage deliveries against your programme.
- Winter build programmes
Sealed, insulated rooms sound dead in the wrong way. Absorption has to be balanced, not maximised, once the envelope is tight.
- The housing stock
Altbau blocks have solid masonry walls and timber joist floors, so airborne noise is controlled but footfall is not. Neubau is concrete with better floors and much harder surfaces.
- The studio and content scene
A deep production and broadcast culture means rooms are specified properly, with measured targets rather than guesses. Suppliers are expected to provide absorption data, not adjectives.
For a Germany practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Durability
Why the climate in Germany changes the material, not the target
Germany is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Supply
What the route into Germany actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Hamburg or Bremerhaven, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Hamburg |
| Packing | Rolled and bagged with track and fixings listed separately. |
| Lead time | Made to size. Confirmed at quote. |
Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before you order.
Sea freight into Hamburg or Bremerhaven, then road to site anywhere in Germany. Air freight for samples and urgent quantities.
The same 5 piece minimum applies on export.
| Any size | 5 pieces |
|---|
Curtains are made to size, so the minimum is counted in pieces rather than area.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Germany
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Germany: questions we are actually asked
Are these soundproof curtains made in Germany?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Germany as the manufacturer rather than through a dealer. Made at our own plant in India, shipped in container loads to German sites, specified against your drawings before anything leaves the factory. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Germany job?
Altbau apartments with timber floors pass noise between homes. Post-war concrete holds it in and rings. The same room needs a different answer depending on which one you are in. Most German jobs arrive with an acoustician already involved. Send us the target values and we will tell you which build-up gets there, and which one will not. Those two things move the build-up far more than the panel figure does.
Is this the right material for Germany conditions?
Germany is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Germany?
ships from: Palwal, Haryana, India, arrives at: Hamburg or Bremerhaven, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before you order.
When are soundproof curtains the wrong purchase?
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
What quantity do we have to order, and in what packaging?
The same 5 piece minimum applies on export. Any size, 5 pieces. Curtains are made to size, so the minimum is counted in pieces rather than area. Rolled and bagged with track and fixings listed separately.
Next step
Tell us the room, we will tell you the build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Germany.