Manufactured in India, supplied in Finland
Soundproof curtains in Finland
We manufacture soundproof curtains at our own plant at Palwal in Haryana, India, and supply them into Finland. Made at our own plant in India and shipped into Helsinki or Kotka.
- Build-up
- 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face
- Total thickness
- 10 to 12 mm
- Weight
- 5.5 kg per sq m
- Reduction
- Up to 30 dB
- STC
- 30
- Lead time
- Made to size
- Minimum order
- 5 pieces
- ASTM E90
- Standard sizes, 8 x 4 ft and 5 x 4 ft
- Made at our own plant, Palwal, Haryana, India
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The material
What this is, and what it changes in a Finland room
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. It is the answer for a doorway, a stage, a partition that must move, not a substitute for a wall.
Work reaching us from Finland is mostly apartments, offices, schools, healthcare, timber buildings, studios, auditoriums.
Concrete apartment blocks and timber housing with very tight envelopes and hard internal surfaces.
- Full height with return Curtain taken floor to soffit with a side return and an overlap, because the gap is what leaks, not the fabric.
- Track with a seal Ceiling track plus a floor seal or drape, so the perimeter is closed when it is drawn.
- Double layer at a doorway Two curtains with an air gap where a single layer will not reach the target.
- What it will not do A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Finland.
02 / Specification
The numbers, and they do not move by city
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Standard5.5 kg per sq m. Openings, stages, temporary partitions
| Build-up | 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face |
|---|---|
| Total thickness | 10 to 12 mm |
| Weight | 5.5 kg per sq m |
| Reduction | Up to 30 dB |
| STC | 30 |
| Test standard | ASTM E90 |
| Standard sizes | 8 x 4 ft and 5 x 4 ft |
On a Finland job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / What drives the brief
The Finland conditions that change the answer
- Targets are written and checked
Work here arrives with numbers attached and someone verifies them afterwards. Send us the target and we will say plainly what our material reaches.
- Timber construction at scale
A great deal of building is timber, which is light. Low frequency passes easily, so mass and decoupling do the work rather than more absorption.
- Sealed for months
Buildings close up through a long winter with ventilation running constantly, so noise accumulates inside and plant noise matters more than street noise.
- A long sea leg
One of the longer routes we operate. Ordering to a real schedule matters, so we quote the full window rather than the port date.
- The housing stock
Concrete apartment blocks and timber housing with very tight envelopes and hard internal surfaces.
- The studio and content scene
A strong recording culture working to measured targets inside concrete structures with good mass.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
Durability in Finland, before acoustics is discussed
Finland is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Route to site
Supply into Finland, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Helsinki or Kotka, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Helsinki |
| Packing | Rolled and bagged with track and fixings listed separately. |
| Lead time | Made to size. Confirmed at quote. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Helsinki or Kotka, then road to site. Air freight for samples and urgent quantities.
The same 5 piece minimum applies on export.
| Any size | 5 pieces |
|---|
Curtains are made to size, so the minimum is counted in pieces rather than area.
06 / Read this first
Four honest warnings before you buy
-
The wrong product for the problem
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Finland
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Finland: questions we are actually asked
Are these soundproof curtains made in Finland?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Finland as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Helsinki or Kotka. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Finland job?
Work here arrives with numbers attached and someone verifies them afterwards. Send us the target and we will say plainly what our material reaches. A great deal of building is timber, which is light. Low frequency passes easily, so mass and decoupling do the work rather than more absorption. Those two things move the build-up far more than the panel figure does.
How does the Finland climate affect this product?
Finland is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Finland?
ships from: Palwal, Haryana, India, arrives at: Helsinki or Kotka, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What should you not buy soundproof curtains for?
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
What is the minimum order and how is it packed?
The same 5 piece minimum applies on export. Any size, 5 pieces. Curtains are made to size, so the minimum is counted in pieces rather than area. Rolled and bagged with track and fixings listed separately.
Next step
Tell us the room, we will tell you the build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Finland.