Manufactured in India, supplied in Poland
Soundproof curtains in Poland
We manufacture soundproof curtains at our own plant at Palwal in Haryana, India, and supply them into Poland. Made at our own plant in India and shipped into Gdansk or Gdynia, then road inland, which keeps the landed cost competitive against European production.
- Build-up
- 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face
- Total thickness
- 10 to 12 mm
- Weight
- 5.5 kg per sq m
- Reduction
- Up to 30 dB
- STC
- 30
- Lead time
- Made to size
- Minimum order
- 5 pieces
- ASTM E90
- Standard sizes, 8 x 4 ft and 5 x 4 ft
- Made at our own plant, Palwal, Haryana, India
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / Start here
The material, and what it actually does on a Poland job
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. It is the answer for a doorway, a stage, a partition that must move, not a substitute for a wall.
Work reaching us from Poland is mostly production halls, warehouses, offices, apartments, schools, clinics, hotels.
Panel block housing with concrete walls that carry mass but no impact isolation, alongside new concrete towers with hard finishes.
- Full height with return Curtain taken floor to soffit with a side return and an overlap, because the gap is what leaks, not the fabric.
- Track with a seal Ceiling track plus a floor seal or drape, so the perimeter is closed when it is drawn.
- Double layer at a doorway Two curtains with an air gap where a single layer will not reach the target.
- What it will not do A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Poland.
02 / Specification sheet
The numbers, and they do not move by city
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Standard5.5 kg per sq m. Openings, stages, temporary partitions
| Build-up | 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face |
|---|---|
| Total thickness | 10 to 12 mm |
| Weight | 5.5 kg per sq m |
| Reduction | Up to 30 dB |
| STC | 30 |
| Test standard | ASTM E90 |
| Standard sizes | 8 x 4 ft and 5 x 4 ft |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What the buildings in Poland do to the specification
- Quoting against local manufacture
Poland makes a lot of building material itself. We win on container pricing and on being able to answer for what is in the product, not on being cheapest by a margin nobody believes.
- Industrial and logistics buildings
Production halls and warehouses need mass and isolation around plant, and absorption only where speech and alarms have to be understood.
- Panel block housing
Prefabricated concrete blocks pass footfall and speech between flats through thin, well connected elements. Surface treatment will not fix that.
- Direct sea into Gdansk
Containers come straight to the Baltic coast rather than through another country, which shortens the chain and keeps the date reliable.
- The housing stock
Panel block housing with concrete walls that carry mass but no impact isolation, alongside new concrete towers with hard finishes.
- The studio and content scene
A growing production and content sector fitting rooms into panel blocks and converted commercial buildings.
Architects working in Poland usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate
Why the climate in Poland changes the material, not the target
Poland is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Getting it there
What the route into Poland actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Gdansk or Gdynia, then road inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Gdansk |
| Packing | Rolled and bagged with track and fixings listed separately. |
| Lead time | Made to size. Confirmed at quote. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Gdansk or Gdynia, then road inland. Air freight for samples and urgent quantities.
The same 5 piece minimum applies on export.
| Any size | 5 pieces |
|---|
Curtains are made to size, so the minimum is counted in pieces rather than area.
06 / Straight talk
The things worth knowing before you place the order
-
The wrong product for the problem
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Poland presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Poland: questions we are actually asked
Is there a Poland factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Poland as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Gdansk or Gdynia, then road inland, which keeps the landed cost competitive against European production. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Poland job?
Poland makes a lot of building material itself. We win on container pricing and on being able to answer for what is in the product, not on being cheapest by a margin nobody believes. Production halls and warehouses need mass and isolation around plant, and absorption only where speech and alarms have to be understood. Those two things move the build-up far more than the panel figure does.
Does Poland weather shorten the life of this material?
Poland is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Poland?
ships from: Palwal, Haryana, India, arrives at: Gdansk or Gdynia, then road inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy soundproof curtains for?
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
What quantity do we have to order, and in what packaging?
The same 5 piece minimum applies on export. Any size, 5 pieces. Curtains are made to size, so the minimum is counted in pieces rather than area. Rolled and bagged with track and fixings listed separately.
Next step
Drawings in, BOQ and a delivered date out
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Poland.