Manufactured in India, supplied in Kolkata
Soundproof curtains in Kolkata
We manufacture soundproof curtains at our own plant at Palwal in Haryana, India, and supply them into Kolkata. Kolkata has the oldest building stock we work with regularly.
- Build-up
- 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face
- Total thickness
- 10 to 12 mm
- Weight
- 5.5 kg per sq m
- Reduction
- Up to 30 dB
- STC
- 30
- Lead time
- Made to size
- Minimum order
- 5 pieces
- ASTM E90
- Standard sizes, 8 x 4 ft and 5 x 4 ft
- Made at our own plant, Palwal, Haryana, India
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The product
What this is, and what it changes in a Kolkata room
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. It is the answer for a doorway, a stage, a partition that must move, not a substitute for a wall.
Work reaching us from Kolkata is mostly old buildings and conversions, offices, clubs and restaurants, schools, clinics, auditoriums.
Older masonry buildings and newer RC frame apartments with hard floors, in very dense neighbourhoods with heavy monsoon damp.
- Full height with return Curtain taken floor to soffit with a side return and an overlap, because the gap is what leaks, not the fabric.
- Track with a seal Ceiling track plus a floor seal or drape, so the perimeter is closed when it is drawn.
- Double layer at a doorway Two curtains with an air gap where a single layer will not reach the target.
- What it will not do A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Kolkata.
02 / The numbers
One specification sheet, the same in every market
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Standard5.5 kg per sq m. Openings, stages, temporary partitions
| Build-up | 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face |
|---|---|
| Total thickness | 10 to 12 mm |
| Weight | 5.5 kg per sq m |
| Reduction | Up to 30 dB |
| STC | 30 |
| Test standard | ASTM E90 |
| Standard sizes | 8 x 4 ft and 5 x 4 ft |
Where a consultant is already engaged on a Kolkata project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / On the ground
What we see driving Kolkata briefs
- Humid most of the year
PET felt does not hold moisture or feed mould, which matters where mineral products sag within a couple of seasons.
- Tall rooms, hard plaster
High ceilings and lime plaster hold sound for a long time. A room can look magnificent and still defeat anyone trying to speak in it.
- Timber floors between floors
Footfall travels straight down through the joists. A resilient layer under the new finish does more than anything applied to the ceiling below.
- The structure is staying
Conversions here keep the original fabric, so the work has to be internal, shallow and ideally reversible.
- The housing stock
Older masonry buildings and newer RC frame apartments with hard floors, in very dense neighbourhoods with heavy monsoon damp.
- The studio and content scene
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
If you are specifying for a Kolkata project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
Durability in Kolkata, before acoustics is discussed
Kolkata is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Supply
What the route into Kolkata actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | three days |
| Dispatch | 2 to 4 working days |
| To site | three days |
| Packing | Rolled and bagged with track and fixings listed separately. |
| Lead time | Made to size. Confirmed at quote. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly fourteen hundred kilometres, normally three days on a dedicated truck.
5 curtains.
| Any size | 5 pieces |
|---|
Curtains are made to size, so the minimum is counted in pieces rather than area.
06 / Before you buy
Four honest warnings before you buy
-
The wrong product for the problem
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Kolkata
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Kolkata: questions we are actually asked
Is there a Kolkata factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Kolkata as the manufacturer rather than through a dealer. Kolkata has the oldest building stock we work with regularly. You buy at factory prices with one consistent batch across the order.
Why would a Kolkata build-up differ from anywhere else?
High ceilings and lime plaster hold sound for a long time. A room can look magnificent and still defeat anyone trying to speak in it. Footfall travels straight down through the joists. A resilient layer under the new finish does more than anything applied to the ceiling below. Those two things move the build-up far more than the panel figure does.
Does Kolkata weather shorten the life of this material?
Kolkata is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How does an order actually travel to Kolkata?
made at: Our own plant, Palwal, Haryana, reaches site in: three days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will soundproof curtains not do?
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
What is the minimum order and how is it packed?
5 curtains. Any size, 5 pieces. Curtains are made to size, so the minimum is counted in pieces rather than area. Rolled and bagged with track and fixings listed separately.
Next step
Drawings in, BOQ and a delivered date out
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Kolkata.